3 Modulars Automatic Control Fast Rolling Shutter Door Cleanroom
Cargo Air Shower For Large Goods
Doors: Soft PVC Fast Speed Scrolled Doors
Door Net Width: 1800mm
Air Shower Tunnel for clean room is a kind of partial clean equipment with rather
strong universality and
is installed at the partition between the clean and non-clean
rooms. Its used for the personnel or matters
to shower before entering the clean area. After using it, the dust
could effectively be reduced to enter the
clean area and maintain the normal working status.
We design, fabricate and install air shower for clean room
These clean room air shower tunnels are especially used in
different kinds of laboratories, pharmaceutical industries and
where they act as entry systems that decontaminate personnel before
entering into clean environment.
Our engineering team carefully designs and configures an air shower
that meets your specific working conditions.
Tunnel and conveyor type units are also constructed for carts,
equipment and cargo etc.
We in-house construct air shower; therefore, we offer our customers
facility to order according to their specific requirements.
Our air shower units are available in different design
configurations and material of construction
. Our air shower prices are competitive, quality is unmatched and
each unit is covered with excellent warranty terms.
Air Shower Tunnel
Where 5 or more person occupancy per cycle is required air shower
tunnel comes into effect.
Air shower tunnels are designed with standard widths 48" and 60".
Customized units are also available with maximum length of 30 ft.
Air showers are one of most demanding arrangements in most of the
industries; where, removing fine particles attached to persons and
products is mandatory.
Such industries are: animal facilities, pharmaceutical, chemical
research lab, electronics and semi-conductor, optical and aerospace
Design and Construction
Air showers are designed in various configurations such as Entry
exit type, L type entry exit, one way entry and two way exit type
and tunnel and conveyor type etc. If you are unsure whi
1. The control system run automatically by photoelectric sensor,
the two door are electric interlocked.
(One door in open state, the other door must in close state. When
people enter air shower, the system will
shower automatically by photoelectric sensor)
2. Air shower time from 1 to 99 seconds which can be adjustable
3. Adopt Pre filter and HEPA filter
4. The door, bottom-board, nozzles are used of stainless steel,
5. When air shower is used to pass cargo, it is without
1. Manual swing door / automatic sliding door/High speed scroll
2. HEPA filter or ULPA filter
3. Material for cabinet: cold-rolled steel plate with powder coated
/ SUS#201 / SUS#304
4. Common fluorescent lamp / UV Sterilizer lamp
5. With voice announce
|Product type||3 Modulars Largo Cargo Air Shower Room Tunnel With Soft PVC Fast
Speed Shutter Doors For Robot Line|
|Material for casing||T=1.2MM Steel with Spray painting for outside, stainless steel 304
for inside, no base|
|Material for doors||Soft PVC|
|Door type||High Speed Shutter Doors|
|Blowing way||3-side blowing|
English intelligent control panel with human voice and
PLC control system
|HEPA filter efficinecy:||99.99%|
|Photoelectric sensor||OMRON brand|
|Shower time||0-99s adustable|
|Spurt wind speed||22-25m/s|
|Safeguard||Leakage switch and thermal overload relay (Protect people from
size and specificaton:
|Product||3 Modulars Automatic Control Fast Rolling Shutter Door Cleanroom
Cargo Air Shower For Large Goods|
|External dimensions (mm)||W2300*D2950*H2300|
|Internal dimensions WxHxD(mm)||1800*D2950*H2000|
|Doors||2 sets of High speed shutter doors|
|Suitable||Both People and Goods|
|Nozzles||18+18+18=54 PCS(3-side blowing)|
|Blower fan||4 sets|
|HEPA filter size||610x610x90mm|
|HEPA filter qty||6PCS|
|HEPA filter efficiency||H13|
|Photolectric sensor||ORMON 2 PCS|
|Fluorescent Lamp||Philips 3x 20W|
|Air shower time||0-99 s Adjustable|
|Spurt wind speed||22-25m/s|
|Control system||Microcomputer control panel with human invoice prompt, electric
interlock, automatical blowing by photoelectric sensor|
Air shower pictures:
Drawing Of Air Shower Tunnel
Testing in factory:
All of equipment will be individually tested for safety and
performance in accordance with international Standards before
Each unit is shipped with a documentation outlining the tests
undertaken and the units individual results for each unit.
Testing before shipment:
1. Appearance inspection
2. Electrical safety tests
3. Air wind speed testing
4. Function testing
The warranty of our equipment is for 1 year, but excluding
consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual with
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or
1. HEPA filter: It should be changed in half or one year once.
2. Pre filter: It should be changed in 3-6 month once.
Why you choose ZHISHENG Company ?
Fast reply in 12 hours if we receive any inquiry or request from
Familiar with equipment.
Technician or enginner can go to Southeast Asian countries for
guiding insallation of machines. Like Thailand, Vietnam,
Philipines, Malaysia and so on.
• Production period:15-30days
• Shipping notice or insurance for you after the goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide 1 year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.
30% prepayment by T/T at order, the balance of payment before
Cleanroom equipments,like air shower, FFU. It is one-year warranty.
We have CE and ROHS Certificate for air shower